Juice Booster Air 3 UK Set - 16A 11 KW 3Phase Smart Mobile Charging for BMW 530e

Weight: 3.00kg / Delivery weight: 3.00kg

PRE ORDER FOR JANUARY 2023 DELIVERY

DOWNLOAD BROCHURE

JUICE BOOSTER 3 air The mobile wall box for all occasions The j+ pilot App allows you to control all the functions of your** JUICE BOOSTER 3 air**: Activation, Time-controlled charging, Current control, Charging progress, Statistics und Load Management. New features are being added on a continuous basis. of j+ pilot.

Individuality Compatible with all electric vehicles with a Type-2 connection. Single-phase to three-phase charging possible at up to 16 amps – with 3.7/7.4 or 11 kW.

Under ideal conditions, your battery will be fully charged in just 1 to 4 hours (depending on size). In short, the JUICE BOOSTER 3 air is the perfect charging station for all applications.

Wall box The JUICE BOOSTER 3 air can be used as a wall charging station in conjunction with the specially developed holder. Type-2 cable Just one cable needed.

Mobile charging station with comprehensive choice of adapters for all conventional domestic and industrial sockets ensures carefree charging all.

5-metre cable length can even be increased to 25 m using an extension cable. 100% compatible with all electric vehicles fitted with a Type-2 connector.

JUICE CONNECTOR Automatic adapter detection with fully automatic adjustment of charging capacity.

Communication Bluetooth and WiFi for simple load management and remote control. Small and handy Up to 10 times smaller than other mobile charging stations. Feather-light with a weight of less than 1 kg.

Comprehensive fault detection and protection against incorrectly connected sockets. Extremely robust able to withstand wheel loads of up to 3 tonnes.

Adapter lock Theft protection at home and on the road.

Programmable button On the Type-2 connector for setting the power level, stopping charging or releasing the connector.

RFID activation RFID reader in the Type-2 connector. Two RFID cards are included free of charge. Integrated fault current detection

The DC and AC fault detection trips effectively at the prescribed value. The integrated safety function eliminates the need for an expensive type B residual current device in your home.

Buy now

£1,258.80 (INC VAT)
Product code: JB3 T2 16A Air 3
Free Delivery: Tomorrow
Order within:

Product care

Ensure your charge cable is protected against water and damp to ensure the long life of your cable.

Ensure that your charging cable is not twisted or excessively tightly bent during cable storage.

Always store the cable in a dry, clean place. Plug to plug cables should be removed from the charge unit when not in use. This will also protect the charge unit from damp and dust.

Dust caps should always be replaced when cable is not in use.

It is advisable to periodically clean the plug pins with a dry, clean cloth. This will remove any damp or dust particles which will cause damage.

DO NOT drive over your cable or plugs or continually drop the plugs.

We recommend your charge your vehicle in the following sequence:

  • Charge Station.
  • First Plug the Male Charger Plug into the Charge Station then Female Plug into your Vehicle.
  • When finished Charging disconnect the Vehicle Plug first, then the Charger Station Plug.

Product Contents

Juice Booster 3 starter pack contains: Juice Booster Air 3 11KW Smart Mobile Charger 2 RFID Cards Communication Bluetooth & Wifi Type 2 16A 3Phase Female Vehicle Plug with 5m Cable 16A Red CEE 3Phase Adaptor 13A UK Adaptor Premium Carry Case Weight 1.8KG

Technical Specifications

Technical specifications: Dimensions Diameter: 53 mm, Length: 213 mm, Cable length 5 m Weight approx. 700kg without cable, approx. 1.8 kg with cable Rated current 6 A to 16 A (20 A as Mode 3 charging cable) Mains voltage 230 V (1-phase) / 400 V (3-phase) Communication Bluetooth, WiFi Fault identification 10 individual fault identifications, incl. Interruption in the case of overheated domestic sockets Safety cut-out for incorrectly wired sockets

Safety cut-out for excessive vehicle current draw CE conformity IEC 62752, IEC 61851, EMV, RoHS Protection rating – RCD IP67 – RCD DC 6 mA, RCD AC 30 mA Activation RFID reader in Type-2 connector (ISO 14443 Type A) Mains connectors

More than 30 self-detecting adapters available for domestic, industrial and EV sockets, approx. 30 cm adapter length Vehicle-side connection Type-2 (EN 62196) Power levels 0 A / 6 A / 8 A / 10 A / 13 A / 16 A

Material, colour Anodised Aluminium, Anthracite

Waterproof Can be used in any weather.

FAQs

Frequently asked questions about EV Connectors' products & service.

Discover more
EV cable selection guide

A short guide on how to choose the right cables, chargers & accessories.

Discover more
Get in touch

Can’t find what you need? We can source specific items to match your exact charging requirements. Simply call us on 01371 811 230 and we’ll do our best to help you! Or complete our enquiry form and we’ll give you a call back.

Enquiry form