Juice Booster 2 UK Basic Set for ON THE GO or as a COMPACT WALL BOX , charging at Home and in the Workplace, ideal solution for Rental Properties and Listed Buildings, you have every situation covered and have maximum flexibility, No need for a FIXED WALL BOX
Watch our video by clicking here
Whats in your Case?
Housing Diamensions
Length: 280mm, Diameter: 70mm
Weight
1.0kg excluding cables, 3.2kg with cables and plugs
Power
1.4kw - 22kw AC
Rated Current
6A to 32A
Mains Voltage
230V (Single Phase) / 400V (3Phase)
Residual Current Device
RCD DC 6mA, AC/DC 30mA with protective conductor monitoring
Protection Class
I
IP protection rating
IP67 (Protects against damaging quantities of dust and immersion in water for short periods)
Vehicle-end connector
Type 2 (EN 62196) Cable length 5m
Mains-end plug
Over 30 self-detecting adapters are available for domestic, industrial and EV sockets, 1.4m power cable + approx 30cm adapter
Total Cable Length
Approx 5m
Temperature Range
Storage: -30°C to + 60°C Operation: -30°C to + 50°C
Operating elecvation limit
Up to 3,000m above sea level
Impact and drop proof
Able to withstand a wheel load of 2000kg should you drive over it by mistake (the rubber casing may burst, and the housing and polug may be scratched or bent, but live components will not be exposed) Drop proof from heights up to 100cm
Colour
Metallic anthracite, black rubber caps and cables
Material
Anodised aluminium with rubber caps
Standards
IEC 62752, IEC 62196, 61851-Mode 2, 61851 - Mode 3 (with Type 2 and Type 3c adapters) EMC, RoHS
Ensure your charge cable is protected against water and damp to ensure the long life of your cable.
Ensure that your charging cable is not twisted or excessively tightly bent during cable storage.
Always store the cable in a dry, clean place. Plug to plug cables should be removed from the charge unit when not in use. This will also protect the charge unit from damp and dust.
Dust caps should always be replaced when cable is not in use.
It is advisable to periodically clean the plug pins with a dry, clean cloth. This will remove any damp or dust particles which will cause damage.
DO NOT drive over your cable or plugs or continually drop the plugs.
We recommend your charge your vehicle in the following sequence:
Charge Station. First Plug the Male Charger Plug into the Charge Station then Female Plug into your Vehicle. When finished Charging disconnect the Vehicle Plug first, then the Charger Station Plug.
The Juice Connector with automatic adapter recognition is the proprietary interface for all Juice adapter
plugs and extension cables. The Connecting parts are coded and therefore protected against polarity reversal.
The Juice Connector has leading contacts to the earth conductor and CP (Control Pilot connection for the
transmission of control signals between the electric vehicle and the charging station) this gives maximum
application safety. The Plug-In connection is designed in such a way that it can also cover future functions
Frequently asked questions about EV Connectors' products & service.
Discover moreA short guide on how to choose the right cables, chargers & accessories.
Discover moreCan’t find what you need? We can source specific items to match your exact charging requirements. Simply call us on 01371 811 230 and we’ll do our best to help you! Or complete our enquiry form and we’ll give you a call back.
Enquiry formEV Connectors offer a variety of delivery charges, depending on the service you require and location. Simply enter your delivery location into the shopping basket ‘shipping quote’ for available delivery charges to your location.
Each delivery of the Goods shall be accompanied by a delivery note detailing the order specification and our Warranty & Product Care Details.
Delivery Returns
